Carrier & Shuttle System

Carrier & Shuttle with aluminum rail

The carrier & mother Shuttle system is an automatic solution of transferring goods in combination with carrier and the mother shuttle. The mother shuttle is powered by the sliding contact line, the child carrier charges online in the mother shuttle, the child carrier accesses the goods in the rack roadway, and the mother shuttle quickly transports in the direction of the vertical rack roadway.

Carrier Technical Parameters Table

Item	Specification
Suitable pallet size	1100 1300
Speed	60m/Min（unloaded），30-50m/Min（fully loaded）
Accelerated speed	0.5m/Min
Operate Efficiency	20pallets/hour/set
Positional Accuracy	±5MM
Operation mode	Manual, standalone and on-line automatic control
Walking speed control Mode	Dc speed control
Motor	Germany Lentz Motor
PLC	Japanese Omron
Photoelectric, laser ranging	Germany PEPPERL
Work loading	1000KG
Power supply way	Super capacitor + lithium, online charging
Rail	Galvanized plate special track
Noise	<70dB(A)

Our Carrier Advantage:

A complete set of security checks:

1,Pallet distance laser ranging 2 sets, can be adjusted by remote control tray spacing 20-150mm, easy to operate;

2, Pallet accurate positioning sensor 4 sets (with counting function);

3, Lifting distance sensor 2 sets;

4, The front and rear distance detection sensor 4 sets, detect the moving track foreign body and the front and rear end stop positioning;

5, Front and rear transverse detection sensor 2 sets, detection personnel and forklift position, prevent collision;

 

Requirements for the Rack and guide rail system

According to the "Steel shelf Structure", "Production Requirements for Suspension Guide" standards and trolley working environment requirements, the shelf system must meet the following requirements:

1. Guide rail material: galvanized plate

2. Straightness of guide rail: every 3 meters ≤±1mm, and the total length range ≤±2mm

3. Guide section distortion: every 2 meters ≤±1mm, and the total length range ≤±2mm

4. In the same section direction, the height error of the two guides should be within 3mm

5. The vertical plane error of the two guide rails is +1 ~ 2mm

6. The end plate (guide rail connecting plate and end baffle) shall not interfere with the operation of the car

7. The sliding surface and side of the butt position of the guide rail should be smooth

8. (At 20°C) the free clearance of the guide rail is 0.5 ~ 1.5mm

 

Working Environment:

Huade Shuttle car fits Ward shelving and rail system to pick and store goods. The shuttle is controlled by radio waves and can glide in both directions. When enabled, taxi from A to A by default.

working temperature (standard): + 5 ° C ~ + 50 ° C

(car) charging and storage temperature: + 5 ° C ~ + 50 ° C

relative humidity: 98% or less

Do not work in an electrostatic, explosive, or corrosive environment.

Mother Shuttle

Mother Shuttle Technical specification:

Item	Technical Data
Suitable pallet size	1100 1300
Speed	120m/Min（unloaded），90m/Min（fully loaded）
Operate Efficiency	20pallets/hour/set
Positional Accuracy	±5MM
Operation mode	Manual, standalone and on-line automatic control
Walking speed control Mode	Frequency conversion control, Danfoss inverter
Motor	Emerson Motor
PLC	Japanese Omron
Photoelectric, laser ranging	Germany PEPPERL
Work loading	1000KG
Power supply way	Safe Busbar
Rail	Galvanized plate special track
Noise	<70dB(A)

Carrier & Shuttle System Cases study:  Jingxi Double Crane pharmaceutical

 

Carrier & Shuttle System Cases study: Chile United Spl.